NHP Finishing Wax - Alchimy 7

The NHP finishing wax is a Nano-Polymer treatment that after washing, will bring shine, softness, water repellency and will limit the adherence of dirt and contaminants.

This wax is to be diluted and used with :

- A high pressure cleaner with a tank

- A foam gun

- A standard sprayer

You can apply it to the entire vehicle just after rinsing. Easy and quick to use, it will allow you to protect your bodywork but also to embellish it! It will also facilitate regular maintenance because it limits the adhesion of contaminants and impurities.

To be used after rinsing a standard wash.

Application Tip:

Recommended dilution = 0.5 to 1%.

1. Pour between 20 and 70 ml into the clean tank of the High Pressure Cleaner or the foam gun or sprayer. Fill the tank with water.

2. Spray the solution on the whole vehicle. Let it work for 1 to 2 minutes

3. Flush the vehicle thoroughly

4. Dry the vehicle.

Repeat the operation to reinforce the shine and protection.

NOTE: Do not allow to dry. For a final finish, dry the vehicle with the drying microfibers.

Tips Start spraying the mixture on the roof of the car and finish with the underbody and wheels.

Rinse the car from top to bottom with NHP.

Application conditions: Apply to a freshly cleaned and damp vehicle.

Conservation: Store away from sunlight and at a temperature between 10°C and 30°C.

Capacity : 470ml (to be diluted)